If you want your camera to stop recording to the micro SD card or the NVR to stop recording to the HDD, you can cease it via Reolink Client. 

Applies to: All Reolink cameras and NVRs.

Below are instructions that will guide you on disabling recording for your camera or NVR. Please install the latest Reolink Client on your PC before setting it up.

Stop Recording for Reolink Cameras:

Step 1. Launch Reolink Client and log in to your camera. Then click the Device Settings gear icon.

1._settings_icon.png

Step 2. Enter the Surveillance > Record > Schedule page. Click the blue Schedule button to turn it grey.

2._recording_schedule.png

Now the camera will stop recording to the SD card.

3._turn_off_schedule.png

Stop Recording for Reolink NVRs:

Step 1. Launch Reolink Client and log in to your NVR. Then click the Device Settings gear icon.

Step 2. Go to the Surveillance > Record page. Click the blue Enable Recording button to turn it off. When it turns grey, the NVR will stop recording to the HDD.

4._diable_recording_for_NVR.png

Note: If you just want one of the cameras (connected to the NVR) to stop recording, you should keep the Enable Recording button blue, and scroll down on the Recording page, and choose the camera, then click the Schedule button to turn it off.

5._disable_one_camera_recording.png