How to Set up Patrol via Web Browsers

With the Patrol function, you can set your camera to patrol different areas at the speed and with the stay time customized by you.

Refer to the following steps to configure the patrol route for your camera via a web browser. 

Step 1. Input the IP Address of your camera on a web browser and log in to your camera.

See how to find the IP address of your camera.

Note: Make sure your PC is connected to the same router as your camera.

Step 2. Click the drop-down arrow to unfold the PTZ menu on the live-view page. Then click Patrol.

Please note that you must set up presets for your camera before setting up a patrol route.

Step 3. Click the Add button to create a new patrol route. Tick to choose the patrol points you need (from the presets points that have been set before). Then click Confirm.

Step 4. Now a patrol route of "my window-my plant-my flower" has been successfully set up as shown in the picture below.

• Click the edit icon to customize the patrol speed (refers to the speed at which the camera moves from the previous patrol point to that patrol point) and the patrol time (refers to the stay time at that patrol point). Click Confirm if you finish changing the parameters.

Step 5. A new patrol route has been successfully created for your camera..

Notes:

1. Now click and the camera will start to patrol; click and the patrol will be suspended.

2. You may click to refresh the patrol points in case they have not been modified automatically as you modified the presets.

3. You could add the same preset repeatedly in a patrol route.

4. You can change the order of the patrol points by dragging them with your mouse. Then the patrol route will change accordingly.

5. You can click the Trash Can button to delete the patrol points. Once all the patrol points are deleted, the patrol route is deleted accordingly.