This article will show you how to install your Reolink Go Ranger PT.
Install the camera on a surface
Step 1. If installing on a wood surface, hold the security mount in place and screw it directly into your wall.
If installing on a masonry surface like stucco or brick, drill holes in a slightly angled way in accordance with the mounting hole template, then insert wall anchors before screwing the security mount into your wall.
NOTE: Avoid using drills which could damage the bracket.
Step 2. Put the camera into the bracket, make sure that the hole on the bracket aligns with the antenna post and the charging port, as shown in the picture.
Step 3. Open the rubber plug on the top of the bracket and secure the camera with the hex key, then close it firmly.
Step 4. Install the antenna to the camera.
Install the camera with loop strap
Thread the provided strap through the bracket and fasten it to a tree.